Helpful Resources
Pool Care
-
Cleaning Your Pool
Turn pump off. Make sure that your skimmer and pump strainer baskets are clean.
Adjust skimmer flaps (located underneath each skimmer basket). Open the flap in the skimmer closest to the pump and filter all the way, and close the other skimmer(s) flap(s). You will vacuum though the skimmer closest to the pump and filter.
If you have a main drain, it should be closed to afford maximum suction through the skimmer. Turn valve to shut off the main drain.
Turn on your pump and check your skimmer for water movement to ensure strong suction.
Stretch out your vacuum hose along the side of your pool. Snap the vacuum head into the end of the vacuum pole. Slip one end of the vacuum hose onto the vacuum head. If you have a swivel cuff on your vacuum hose, make sure the swivel end goes onto the vacuum head.
Prime the hose. Place the vacuum head (with the hose and pole attached into the pool. Place the hose end (you have in your hand), against the return fitting and allow the water to "blowout" or displace the air in the vacuum hose. The vacuum head will rise and bubble. When it has settled to the bottom of the pool, cup your hand over the vacuum hose and carry it to the skimmer closest to the pump and filter.
Place the skim vacuum plate on the end of the hose. Bring the hose over the coping and place it directly on the skimmer basket. Begin vacuuming!
Move the vacuum head slowly. If the vacuum head is moved too rapidly it will stir up sediment and your results will be less than satisfactory when the dirt has settled requiring a second vacuum.
When completed, disconnect, remove and drain hose before storing. Return skimmer flaps and valves to their normal operating positions. Check filter pressure gauge to see if the filter needs to be back washed.
Helpful Tips:
- Do not lift the vacuum head out of the water or you will lose your prime.
- Disregard your filter pressure reading it usually drops while vacuuming.
- Disregard air in your pump basket.
- Check skimmer basket periodically if the pool has a lot of leaves or other debris in it.
- Backwash the filter if the pool is very dirty, and emptying the skimmer basket does not restore suction.
- If suction is too strong, open the other skimmer flap 1/8 of the way.
-
Pool Maintenance 1-2-3
Fill your chlorinator with 6 – 7 chlorine tabs on the same day each week. Do not exceed 7 tabs unless specifically directed to do so. Chlorine tabs dissolve like bars of soap, do not wait until there are none left in your chlorinator. Add them on the same day of the week, 7 days apart. Test your pool water twice a week. If your water test indicates a low chlorine level, turn up your chlorinator. If your test indicates a high chlorine level, lower your chlorinator. Bather load, rainfall and sun exposure will affect the amount of chlorine your pool will require.
Shock your pool at least once a week (we recommend lithium based granular shock), twice per week when it is very hot, or the bather load is high. You should add half a pound of granular shock, premixed in water, for every 10,000 gallons of pool water. You should only shock your pool in the evening, as the sun burns off the chlorine.
Algaecide should be added once per week as a preventative measure. Follow the instructions on the bottle for the "maintenance" dose.
It's easier to avoid getting algae, then killing off an algae bloom during July and August's hot sunny days!
-
Filter Do's and Don'ts
Skimmer Water Level: Ensure that the pools water level is halfway up the skimmer faceplate. This is the normal operating level, (even with the third screw on the faceplate as you count from the bottom up).
Skimmer Basket / Throat: Keep the skimmer basket clean and make sure the skimmer throat is not obstructed. Adjust the skimmer flap, (located at the bottom of each skimmer) the one in the skimmer closest to the pump should be half-open, any others should be open all the way.
Pump Strainer: Open pump to ascertain basket is clean, intact and seated properly. Never operate your pump without water or the strainer basket in the pump. Before closing, fill the pump housing with water. Replace the housing cover, making sure the gasket is in position so no dirt or grit will prevent a tight seal.
Filter Pressure Gauge: When starting the pump, it may take a short time for the filter pressure to normalize due to the presence of air in the suction lines. By opening the air bleeder valve located on the top of your filter to expel the air more rapidly. When the air has been expelled, the pressure gauge reading should be 10-15 psi on most filters (15-20 psi on systems with heaters).
Diatomaceous Earth Filters: Do not operate your DE filter longer than one minute without adding DE. Add DE to the skimmer closest to the pump (with the skimmer flap wide open) once the water comes out of the returns in a steady stream. Add the DE slowly to the skimmer, or premix the DE in a bucket of water and then add it to the skimmer. Once done, readjust the skimmer flap, and bleed the air out of the filter.
-
Clear Water Tips
Test - your pool water twice a week. If your water test indicates a low chlorine level, turn up your chlorinator. If your test indicates a high chlorine level, lower your chlorinator. Bather load, rainfall and sun exposure will affect the amount of chlorine your pool will require.
Tabs - fill your chlorinator with 6 – 7 chlorine tabs on the same day each week. Do not exceed 7 tabs unless specifically directed to do so. Chlorine tabs dissolve like bars of soap, do not wait until there are none left in your chlorinator.
Shock - your pool at least once a week, twice per week when it is very hot, or the bather load is high. You should add a half pound of shock, for every 10,000 gallons of pool water. You should only shock your pool in the evening, as the sun burns off the chlorine.
Algaecide - should be added once per week as a preventative measure. Use 5 ounces of 30% Algaecide per ten thousand gallons of pool water. It is less expensive to add this product weekly, then it is to clear up a green pool when it occurs.
pH - needs to be checked twice a week and maintained within 7.2 to 7.6 on your test strip. If your Total Alkalinity is not above 100 PPM your pH will have a tendency to drift, so always adjust Total Alkalinity first then retest and adjust pH if needed.
We suggest that you have your pool water tested professionally twice per month and immediately after opening, and prior to closing your pool.
Preventative maintenance costs less than clearing up your pool after it has turned green!
More FAQs
-
How much does it cost?
Each pool is as unique as the home you live in. And each pool is priced based on its shape, size and depth; the accessories you want, such as a heater or a slide; and the conditions that have to be addressed to install the pool in your yard. For instance, removing a lot of trees and stumps in addition to installation will cost more than simply installing a pool in a level backyard without trees.
The best way to price your pool is to talk to your Pacific Showcase Builder, who can help you pick out the pool that best meets your family's needs. Your Showcase Builder will give you a good idea of what you can expect during installation. And though you're never under any obligation to have the builder assist you, he or she can help prevent unwanted surprises.
-
How long does the installation take?
The actual pool installation can usually be accomplished within two weeks, but various conditions can reduce or extend that time frame. Most areas require building permits before installing an inground pool, with additional inspections during the installation process. This can add some time overall, based on your yard, the placement of the pool and how busy the inspectors are. If you are having your builder do custom work on the pool, such as stone decking or retaining walls, you can expect installation to take a little longer. The important thing to remember is to build the pool you want the first time, since trying to change it or add features later can become expensive.
-
What is Graphex?
Graphex is the name given to the unique technology used in Pacific Pools' manufacturing process. We take a recipe of engineered polymer resins, heat them to an extremely high temperature, then inject the molten mixture into an aluminum mold under pressure. After introducing nitrogen gas, a honeycomb design is created, resulting in a solid outer surface with a foamed core. It's both lightweight and extremely strong.
If you look at the backside of a Pacific Pool wall panel, you'll see that the engineered design encompasses a GRAPH pattern of horizontal and vertical ribbing, filled in with a HEXagonal throughout.
The combination of superior material and engineered panel design give you the ultimate pool: GRAPHEX.
-
How long will my Pacific Pool last?
The combination of the polymer material with the engineered panel design means your Pacific Graphex Pool will last a lifetime. In fact, we put a lifetime transferable warranty on every pool we manufacture. Should you sell your home, the warranty is transferable to the next owner at no additional cost to either of you. At Pacific Pools, we pride ourselves in providing peace of mind.
-
What type of lining is used?
There are various types of pool surfaces used in the pool industry. Some are concrete, some are marcite, some are acrylic or gelcoat, and some are vinyl. No matter if you have a gunite, concrete, fiberglass or steel walled pool, you need some type of surface to protect the pool's structure and to retain the water.
Ask anyone in the pool business which surface is easiest to maintain, and you'll hear, "vinyl." Vinyl is the most economical, low-maintenance surface available in the pool industry today. Since the Pacific Pool is designed and built for the homeowner's enjoyment, it only makes sense that we offer a vinyl surface that makes care easy, without rough surfaces to scrape feet or toes.
Each Pacific vinyl liner is produced from specially treated vinyl with fungicides to inhibit algae growth and UV inhibitors to keep it looking like new. No other surface can offer the same long-lasting fun.
-
What maintenance does my Pacific Pool require?
If you don’t vacuum your house, it will get dirty. Likewise, any pool requires periodic cleaning – a filtration system will help to provide maximum efficiency.
Expect more cleaning around your pool’s start-up, until your decking is completed and the grass around your yard is in place.
Most people opt for an automatic pool cleaner, a very economical addition to the pool package. Your pool will also require chemicals to ensure that the pool water maintains optimal clarity and sanitation. Your pool should require less than one hour of your time weekly when maintained properly – leaving the other 167 free for fun!
-
What kind of service will I receive from my Pacific Pools builder?
Your Pacific Pools Showcase Builder is a recognized industry leader. He or she is ready to provide you with a complete service program, answering questions or alleviating any concerns along the way. Be assured that your Showcase Builder is trained in the latest methods and information available to support you and your Pacific Pool today – and in the years to come.
-
What size-and-shape options does Pacific Pools offer?
If you can picture it, you can swim in it. At Pacific Pools, we know that not every pool owner wants the same size or shape. So we created flexibility through custom designs and added features. Be limited only by your imagination. We’ve even designed and built guitar-shaped pools for several fussy music lovers.
-
What accessories (such as heaters) are available?
Your Pacific Pools Showcase Builder can show you many optional accessories available for your pool. When planning your pool, make a list of all the things you would like, including lighting, slides and waterfalls – than ask your builder how they can be a part of your Pacific Pool.
-
Are there any weather/climate issues I should consider when choosing a pool?
Depending on where you live, there will be things to consider when planning your pool. If you live in the Midwest or Northeast, you may want to add a heater and probably a Pacific safety cover to your pool for those winter months.
If you live in the South, make sure the decking you choose reflects the sun so the heat won’t burn your feet.
Wherever you live, your Pacific Showcase Builder is an expert when it comes to your region, having built pools for years in the area. Your builder will make sure to build a pool that meets the needs of your family and lifestyle.
-
Where can I register my pool's Warranty?
You can visit the www.yourpoolwarranty.com page, or call Pacific Industries at 1-800-833-3800 to ask for the just mail in the card that was included in your package.
Contact Modern Comfort Pools
Fill out the form below to learn more about us or to request a free estimate.
Contact Us
We will get back to you as soon as possible.
Please try again later.

